Products

The CBA-32P is a 24 contact circuit breaker analyzer designed to perform timing & motion analysis on all types of circuit breakers typically installed in electrical substations.

The breakers may be at the distribution level or at very high voltage, up to 800 kV.

It is driven by the proprietary CBA Win© software software included with the instrument ...

The GEN-6 is a universal recloser control analyzer designed to test all types of recloser cabinet controllers. Connected to the appropriate interfaces, the GEN-6 can test: Mc Graw-Edison, Cooper reclosers type F3, F4, F5, FXB, DC NOVA, as well as the ESV Westinghouse, Joslyn 351J, ABB PCD2000, Schweitzer SEL-351R models or any equivalent other type. It is designed to replace all old electronic recloser control testers ...

Zensol introduces a new instrument, the TAP-4 totally dedicated to Vibro-Acoustic measurements on On-Load Tap Changers.

Faults associated to On-Load Tap Changers are at the origin of up to 40% of the transformer failures.

This new instrument allows the maintenance crew to detect most of common OLTC malfunctions as contact wear, arcing in diverter, arcing in selector, synchronism problem, drive mechanism problem, brake failure etc ...

Zensol is the first to introduce a new instrument, the CBV, totally dedicated to vibration measurements on HV circuit breakers.


This new instrument will allow the maintenance crew to detect mechanical anomalies in the circuit-breaker drive mechanisms and other moving parts in the interrupting chamber that should be inspected and overhauled.

The CBV is used in conjunction with accelerometers ...

The CBV-16 is a high performance, software driven data acquisition system, operating under Microsoft Windows.

The CBV-16 is designed to perform timing & motion analysis on all types of circuit breakers typically installed in electrical substations going from the distribution level all the way to high voltage levels, up to 800 kV. The timing and motion analysis is done based on the International Standard CEI56 ...

The new CBV-27 is a high performance, software driven data acquisition system, operating under Microsoft Windows.

The CBV-27 is designed to perform timing & motion analysis on all types of circuit breakers typically installed in electrical substations going from the distribution level all the way to high voltage levels, up to 800 kV. The timing and motion analysis is done based on the International Standard CEI56 ...

The CBV-8 is a high performance, software driven data acquisition system, operating under Microsoft Windows.

The CBV-8 is designed to perform timing & motion analysis on all types of circuit breakers typically installed in electrical substations going from the distribution level all the way to high voltage levels, up to 800 kV. The timing and motion analysis is done based on the International Standard CEI56 ...

Zensol is the first to introduce a new instrument, the CBV-19, totally dedicated to vibration measurements on HV circuit breakers.
This new instrument will allow the maintenance crew to detect mechanical anomalies in the circuit-breaker drive mechanisms and other moving parts in the interrupting chamber that should be inspected and overhauled.

The CBV-19 is used in conjunction with accelerometers ...

Zensol is the first to introduce a new instrument, the CBV-27, totally dedicated to vibration measurements on HV circuit breakers.
This new instrument will allow the maintenance crew to detect mechanical anomalies in the circuit-breaker drive mechanisms and other moving parts in the interrupting chamber that should be inspected and overhauled.

The CBV-27 is used in conjunction with accelerometers ...

The SIM-CB is a very practical circuit breaker simulator to assist in testing any type of protection relay. This unit is software configurable.

Used in tandem with a current source, the SIM-CB assists in testing all kinds of protection relays (such as the Hydro-Québec's CEPA).