The cables described below are the standard ZENSOL 10' (3 m) cables. Each may be fitted with our standard clips or with automobile battery type clips. All of these cables, except the 52A and 52B cables, are supplied with the CBA-32P at no additional charge.

1 ground cable
3, 4, 8 or 12 contact cables, 3 conductors, 10' (3 m) long, for models with 3, 8, 16 or 24 contact inputs respectively. Each cable connects to two breaker contacts via a wire for each contact and a common return.
3 or 6 displacement cables, 10' (3 m) long, with small clips, for models with 5 and 8 analog inputs respectively.
1 command cable, 35" (10.6 m) long, four conductors, with clips (close, open, close return, open return).
Main power cord
Contact cables for 52A, 52B (optional)

Cable ordering reference

The standard clips on the contact cables are type 21A instrumentation clips. On request, the cables may be fitted with steel automotive-type clips.

Automotive-type clips Standard test clips

On request, cables rated for extreme cold may be supplied in standard or other lengths.
Standard cables may be used between
-10oC and 105oC. In very cold climates, cables rated for extreme cold allow field testing in temperatures between -50oC et 80oC. 

Additional cables recommended for tests with the CBA-32PTM system in the field.

- 25' (7.6 m) extension cables (prices available on request), depending on model (for minimum recommended quantities, see table below). Other lengths are available.

- Power extension cord.

Related Documents

 
- Cable ordering reference

 
- Guide for CBA Accessories