Current Transducer 20 Amps ZCS-20

Designed to measure the AC, DC or impulse currents, this current transducer is the ideal tool to measure the current in the wires that goes through your circuit breakers (at the opening or closing operations).

Based on the Hall effect concept, it is able to measure currents reaching up to 20A.

The primary circuit (high current) and the secondary circuit (electronic circuit) are mounted on an electronic circuit board of 130x100mm.

 
- Able to measure currents reaching up to 20A.
- Galvanic isolation between the primary and secondary circuits.
- Extremely accurate (±0.2%).
- Very good linearity (<0.1%).
- Low temperature drifting.
- High bandwidth.

 
 

Technical Features

Nominal primary effective current : 20A.
Primary current : from 0 to ±1500A.
Nominal secondary effective current : 200mA.
Transformation ratio : 1 : 5000.
Power supply : 100 - 240 VAC - 50Hz/60Hz
Bandwidth : 100 KHz.